>> Home > ProductsProducts
Communication Control Unit NSC2200E

NSC2200E hardware is based on multi-layer design, easy to combination and expansion, supports 24 serial ports maximum, providing 3 pairs independent channel to connect to NLDC and distribution center , every channel can use main standby way. Four or six Ethernet network interfaces are supported. Two profibus-DP interfaces are provided.

NSC2200E hardware is based on multi-layer design, easy to combination and expansion, supports 24 serial ports maximum, providing 3 pairs independent channel to connect to NLDC and distribution center , every channel can use main standby way. Four or six Ethernet network interfaces are supported. Two profibus-DP interfaces are provided.

Embedded communication protocol: IEC103/101/104, Profibus, IEC61850, DNP3++ and all kinds of national protocol, and can expand.

Communication mode: RS232, RS485, TCP/UDP, Profibus-DP Friendly MMI: suitable to various projects and need. Monitor interface for supervise system operation , status.

NSC2200E produced for users’requirements of high reliable adapts the latest technological requirements. It adapts high reliable hardware architecture, no fans, no hard disk, low power lose, long time continuous running. Embedded Linux operating system and communication system adapt modular structure,multitask OS, high performance reliability.

  • Chassis

6U high, 3U wide. IP41 protection level.

  • Bus module

Bus module is considered as a carrier of other modules, provide voltage to other modules, and connect them. It has 5 slots for chosen according to different configuration.

  • Power module

Power module provides electric power to other modules on bus module. Range AC 85~265V / DC 90~375V.

  • CPU module

CPU card embedded 1GB RAM , adopt FLASH storage kernel and procedure, and it has internal interface, can expand memory. CPU module has 4-6 10/100M adaptive Ethernet interface for network communication.

  • Serial port module

Every serial port module has 8 serial ports. The NSC2200E supports maximum 3 Serial port module.

  • Profibus-DP port module

Every profibus-DP port module has 2 profibus-DP interfaces. The NSC2200E supports maximum 3 Profibus-DP port module.

  • MMI module

On front module with LCD, LED light, keyboards connect with CPU. Adopt Stud bump light and LCD display work with keyboard to know running imformation.

  • Front panel

Connect LCD, LED light, keyboard with CPU. 24 serial port communication LED indicator shows imformation sending and receiving status. Two groups of input/output LED light indicate the status of two interface. 4-6 network status LED light indicate communication status of network interfaces. There is one running status LED light, scintillation once every second indicate that CPU running normally, another commission LED light shows software abnormal information. LCD used with keyboard, can check running parameters and real time value of communication machine, communicastion parameters and every single telemetering and telecommunication value. Can use matching supervise and control software to check more details.

  • Rear panel

The dimension of NSC2200E is 19 inch 1/2wide 6U, back insert slot. A power module and a CPU, supports another 1-3 communication interface module with 8 RS485/RS232 serial interface or 2 Profibus-DP interface.


NARI Technology Co., Ltd.   Add: NO.19 Chengxin Avenue, Nanjing, CHINA
Copyright NARI Technology Co., Ltd. 2001-2015 All Rights Reserved